Bar

Hot rolled and cold drawn product.

Description

FinishDescriptionFinish according
to 10088:2005
51 CDB for building
MP higher than finish 41
2H
61 CDB for building
MP higher than finish 51
2H
44 CDB: centerless ground 2G
54 CDB for building, centerless ground
MP higher than finish 44
2G
64 CDB for building, centerless ground
MP higher than finish 54
2G

MP: mechanical properties

Delivery / length / tolerance

Ø
(mm)
Length
(mm)
Tolerance
(mm)
Strightness
(mm/m)
Ovalshaped
2.00-4.99 2000-6100

+50

1 50% of tolerance
interval
5.00-13.10
13.11-30.00 +25

The specifications of some of the products may vary according to grade and finish. Other sizes or specifications on request.

Short bars: 5% allowed, minimum length 2000 mm

Mechanical properties (for guidance only)

Ø
(mm)

Rm
(Mpa)
Rp0.2%
(MPa)
Rp1.0%A5
(%)
2.00-6.34

700-1000

>600

>700

>12

6.35-30.00 700-850 >350 >400 >20
5.00-22.00
(1)
>700 >550 -- >20
14.00-30.00
(1) (2)
>800 >650 -- >15

(1) higher mechanical properties can be supplied depending on the grade
(2) AISI 304L, AISI 316L and duplex only

Tolerance

Ø
(mm)
Finish

41

44

51

54

61 64
2.00-3.99

 

h11
h9


         
4.00-4.99 h9
h8


       
5.00-13.10 h11
h9
h9    
13.11-13.99    
14.00-22.00 h11
h9
h9
22.01-30.00    


Other tolerances:
Other tolerances can be supplied (ASTM, k, etc.) whenever the tolerance inverval will be the same or higher than the tolerance on the table.

Important

Data subject to changes according to international standards and working practices.
Other grades on request: customer.service@acerinox.com