Cold rolled reinforcement bar
Dimensions
Ø min.(mm) |
Ø | Max. length (mm) | Length tolerance (mm) |
---|---|---|---|
4.00 | 14.00 | 8000 | -0/+100 |
Other tolerances:
- According to BS 6744 and UNE 36067
- According to DIN 488 and UNE 36068, regarding
geometrical and mechanical properties
Short bars: ≤5%
The specifications of some of the products may vary depending on the grades and finishes. Other sizes or specifications on request.
Mechanical properties (for guidance only)
Finish (mm) |
Ø | Rm (MPa) | Rp0.2% (MPa) | A5 % |
---|---|---|---|---|
27 | 14 | >700 | >600 | >12 |
Important
Data subject to changes according to international standards and working practices.
Other grades on request: customer.service@acerinox.com
Types of Steel
Austenitics | ||
---|---|---|
Euronorm | UNS | AISI |
1.4301 | X5CrNi18-10 | 304 |
1.4307 | X2CrNi18-9 | 304L |
1.4401 | X5CrNiMo17-12-2 | 316 |
1.4404 | X2CrNiMo17-12-2 | 316L / *≈ 316L |
Duplex | ||
Euronorm | UNS | AISI |
1.4482 | X2CrMnNiMoN21-5-3 | S32001 (2001) |
1.4462 | X2CrNiMoN22-5-3 | S31803 (2205) |
1.4362 | X2CrNiN23-4 | S32304 (2304) |