Wire

The stainless steel wire has a wide range of general applications.

Alambre usos generales

Clamps

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grades: 1.4301-1.4404
  • Packaging: coils, trancane, roseta coil
  • Mechanical properties: 700/800 N/mm2
  • Finish: bright without degreasing
More images

Welding wire, MIG

Characteristics

  • Diameter (mm): 0.80, 1.00, 1.20
  • Diameter tolerance (mm): -0.020
  • Stainless steel grades: 1.4370-1.4430
  • Packaging: metallic and plastic reels,
        coils, drums
  • Mechanical properties: 1100/1600 N/mm2
  • Finish: bright
More images

Redrawing wire

Characteristics

  • Diameter (mm): 0.80, 0.90, 1.00, 1.20
  • Diameter tolerance (mm): +0.020
  • Stainless steel grades: 1.4307-1.4306-1.4303
        1.4404
  • Embalajes: drums
  • Mechanical properties: annealed
  • Finish: dull annealed
More images

Anchorage, fastenings

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grades: 1.4301-1.4401-
        1.4482-1.4362-1.4462
  • Packaging: coils, roseta coils, trancane
  • Mechanical properties:
        650/750 N/mm2 = annealed
        800/900 N/mm2 = hardened
  • Finish: annealed dull and salted
        hardened bright
More images

Anchorage for building

Characteristics

  • Diameter (mm): 2.92, 3.92
  • Diameter tolerance (mm): +0/-0.020
  • Stainless steel grades: 1.4301-1.4401-
       1.4362-1.4462-1.4482
  • Packaging: coils, roseta coils
  • Mechanical properties: 650/750 N/mm2
  • Finish: bright without degreasing
More images

Anchorage for exhaust systems

Characteristics

  • Diameter (mm): 8.00, 10.00
  • Diameter tolerance (mm): h-11
  • Stainless steel grades: 1.4307-1.4567
  • Packaging: coils, trancane
  • Mechanical properties: 700/750 N/mm2
  • Finish: bright and degreased
More images

Cable trays

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grade: 1.4301-1.4401-1.4362
        1.4462-1.4482
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 70/80, 80/90 N/mm2
  • Finish: bright and degreased
More images

Ball bearings

Characteristcs

  • Diameter (mm): según pieza
  • Diameter tolerance (mm): +0.020
  • Stainless steel grade: 1.4307-1.4404
  • Packaging: coils, roseta coils, trancane
  • Mechanical properties: 650/750 N/mm2 
  • Finish: bright without degreasing
More images

Ropes

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): +0.020
  • Stainless steel grade: 1.4301-1.4401-
        1.4362-1.4462
  • Packaging: metallic and wooden coils,
       customer's coils
  • Mechanical properties: 1400/1600,
        1600/1800 N/mm2
  • Finish: bright / dull
More images

Chains

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grade: 1.4307-1.4404
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 700/800 N/mm2
  • Finish: bright and degreased
More images

Conveyor belts

Characteristics

SPIRAL

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grades: 1.4301-1.4401-
        1.4845-1.4841
  • Packaging: coils, roseta coils
  • Mechanical properties: annealed
  • Finish: bright/annealed dull

AXE

  • Diameter (mm): depending on the piece
  • Diamter tolerance: h-11
  • Stainless steel grades: 1.4301-1.4401-
        1.4845-1.4841
  • Packaging: coils, roseta coils, trancane
  • Mechanical properties: 800/900,
        900/1000 N/mm2
  • Finish: degreased bright/dull
More images

Nails

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): -0.020 mm
  • Stainless steel grade: 1.4307-1.4404
  • Packaging: coil, trancane, roseta coil
  • Mechanical properties: 800/950 N/mm2
  • Finish: dull and soap coated
More images

J Nails

Characteristics

  • Diameter (mm): 2.67
  • Diameter tolerance (mm): h-11
  • Stainless steel grade: 1.4301
  • Packaging: coils, roseta coils
  • Mechanical properties: 800/900 N/mm2
  • Finish: bright without degreasing
More images

Rivets

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): -0.020 mm
  • Stainless steel grade: 1.4301-1.4307-1.4404
  • Packaging: coils, roseta coils, trancane
  • Mechanical properties: 1100/1400 N/mm2
  • Finish: coated dull
More images

Free cutting (machining)

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-9
  • Stainless steel grade: 1.4305
  • Packaging: coils, roseta coils, trancane
  • Mechanical properties: 700/850 N/mm2
  • Finish: bright and degreased
More images

Pin hinge

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): +0/-0.020
  • Stainless steel grade: 1.4567
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 550/650 N/mm2
  • Finish: bright without degreasing
More images

Electropolishing, tableware

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grade: 1.4301-1.4401-1.4362
        1.4462-1.4482
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 700/800-800/900-
        900/1000 N/mm2
  • Finish: bright and degreased
More images

Filters

Characteristics

PROFILE

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): +0.020
  • Stainless steel grade: 1.4307-1.4404-
        1.4301-1.4401
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: annealed
  • Finish: dull

ROUND

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-9
  • Stainless steel grade: 1.4307-1.4404-
        1.4301-1.4401
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 800/900,
        1100/1400 N/mm2
  • Finish: bright and degreased
More images

Roof fixings

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-9
  • Stainless steel grade: 1.4307
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 700/800 N/mm2
  • Finish: bright without degreasing
More images

Roof hooks

Characteristics

  • Diameter (mm): 2.40, 2.65, 2.67
  • Diameter tolerance (mm): h-11
  • Stainless steel grade: 1.4301-1.4016-
       1.4362-1.4462-1.4482
  • Packaging: coils, roseta coils
  • Mechanical properties: 800/900 N/mm2
  • Finish: bright without degreasing
More images

Staples

Characteristics

  • Diameter (mm): 1.53
  • Diameter tolerance (mm): +0.010
  • Stainless steel grade: 1.4301
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 700/800 N/mm2
  • Finish: bright without degreasing
More images

Metallic wool

Characteristics

  • Diameter (mm): 3.10
  • Diameter tolerance (mm): h-9
  • Stainless steel grade: 1.4113
  • Packaging : trancane (1000 kg)
  • Mechanical properties: 950/1050 N/mm2
  • Finish: dull without degreasing  (soap)
More images

Mesh

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): h-11
  • Stainless steel grade: 1.4301-1.4401-1.4845
        1.4841-1.4362-1.4462-1.4482
  • Packaging: coils, trancane coils, roseta coils
  • Mechanical properties: 800/900,
         950/1050, 1000/1100 N/mm2
  • Finish: bright with or without degreasing
More images

Springs

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): EN 10270-3
  • Stainless steel grade: 1.4310-1.4401
  • Packaging: coils, trancane, roseta coil
  • Mechanical properties: EN 10270-3
  • Finish: coated dull, degreased bright 
More images

Tubular rivets

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): +0/-0.020
  • Stainless steel grade: 1.4567
  • Packaging: coils, trancane, roseta coils
  • Mechanical properties: 49/55 Kg/mm2
  • Finish: coated dull
More images

Weaving

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): +0.015, +0.020
  • Stainless steel grade: 1.4307-1.4306-1.4404
  • Packaging: coils, plastic reels, drums
  • Mechanical properties: 650/750 Kg/mm2
  • Finish: annealed bright
More images

Screws

Characteristics

  • Diameter (mm): depending on the piece
  • Diameter tolerance (mm): -0.020
  • Stainless steel grade:
    - Hexagonal: 1.4307-1.4404
    - Rest: 1.4567
  • Packaging: coils, roseta coils, trancane
  • Mechanical properties:
    - Hexagonal: 650/800 N/mm2
    - Rest: annealed and salted
  • Finish: coated dull
More images

Welding wire, TIG

Characteristics

  • Diameter (mm): 1.00, 1.20, 1.60,
        2.00, 2.40, 3.20
  • Diameter tolerance (mm): -0.020
  • Stainless steel grade: 1.4316-1.4430
  • Packaging: tubes, boxes
  • Mechanical properties: 110/160 N/mm2
  • Finish: bright and degreased
More images

Important

Data subject to possible changes according to international standards and working practices.
Other grades on request: customer.service@acerinox.com

Types of Steel
Austenitics
Euronorm UNS AISI
1.4301 X5CrNi18-10 304
1.4401 X5CrNiMo17-12-2 316
1.4571 X6CrNiMoTi17-12-2
1.4307 X2CrNi18-9 304L
1.4404 X2CrNiMo17-12-2 316L / *≈ 316L
1.4845 X8CrNi25-21 310S
1.4841 X15CrNiSi25-21 314
1.4305 X8CrNiS18-9 303
1.4310 X10CrNi18-8 302
1.4306 X2CrNi19-11 304L
1.4303 X4CrNi18-12 305
1.4370 18-8-Mn -
1.4430 19-12-3-L AWS 316L
1.4316 19-9-L AW 308L
1.4372 X12CrMnNiN17-7-5 201
1.4567 X3CrNiCu18-9-4 304Cu
Ferritics
Euronorm UNS AISI
1.4016 X6Cr17 430
1.4113 X6CrMo17-1 434
Duplex
Euronorm UNS AISI
1.4482 X2CrMnNiMoN21-5-3 S32001 (2001)
1.4362 X2CrNiN23-4 S32304 (2304)
1.4462 X2CrNiMoN22-5-3 S31803 (2205)