Bar
Hot rolled and cold drawn product.
More images
Description
| Finish | Description | Finish according to 10088:2005 |
|---|---|---|
| 51 | CDB for building MP higher than finish 41 |
2H |
| 61 | CDB for building MP higher than finish 51 |
2H |
| 44 | CDB: centerless ground | 2G |
| 54 | CDB for building, centerless ground MP higher than finish 44 |
2G |
| 64 | CDB for building, centerless ground MP higher than finish 54 |
2G |
MP: mechanical properties
Delivery / length / tolerance
| Ø (mm) | Length (mm) | Tolerance (mm) | Strightness (mm/m) | Ovalshaped |
|---|---|---|---|---|
| 2.00-4.99 | 2000-6100 |
+50 |
1 | 50% of tolerance interval |
| 5.00-13.10 | ||||
| 13.11-30.00 | +25 |
The specifications of some of the products may vary according to grade and finish. Other sizes or specifications on request.
Short bars: 5% allowed, minimum length 2000 mm
Mechanical properties (for guidance only)
|
Ø | Rm (Mpa) | Rp0.2% (MPa) | Rp1.0% | A5 (%) |
|---|---|---|---|---|
| 2.00-6.34 |
700-1000 |
>600 |
>700 |
>12 |
| 6.35-30.00 | 700-850 | >350 | >400 | >20 |
| 5.00-22.00 (1) |
>700 | >550 | -- | >20 |
| 14.00-30.00 (1) (2) |
>800 | >650 | -- | >15 |
(1) higher mechanical properties can be supplied depending on the grade
(2) AISI 304L, AISI 316L and duplex only
Tolerance
| Ø (mm) | Finish | |||||
|---|---|---|---|---|---|---|
|
41 |
44 |
51 |
54 |
61 | 64 | |
| 2.00-3.99 |
h11 h9 |
|||||
| 4.00-4.99 | h9 h8 |
|||||
| 5.00-13.10 | h11 h9 |
h9 | ||||
| 13.11-13.99 | ||||||
| 14.00-22.00 | h11 h9 |
h9 | ||||
| 22.01-30.00 | ||||||
Other tolerances:
Other tolerances can be supplied (ASTM, k, etc.) whenever the tolerance inverval will be the same or higher than the tolerance on the table.
Important
Data subject to changes according to international standards and working practices.
Other grades on request: customer.service@acerinox.com
Types of Steel
| Austenitics | ||
|---|---|---|
| Euronorm | UNS | AISI |
| 1.4305 | X8CrNiS18-9 | 303 |
| 1.4570 | - | 303Cu |
| 1.4310 | X10CrNi18-8 | 302 |
| 1.4301 | X5CrNi18-10 | 304 |
| 1.4541 | X6CrNiTi18-10 | 321 |
| 1.4307 | X2CrNi18-9 | 304L |
| 1.4306 | X2CrNi19-11 | 304L |
| 1.4567 | X3CrNiCu18-9-4 | 304Cu |
| 1.4560 | X3CrNiCu 19-9-2 | - |
| 1.4372 | X12CrMnNiN17-7-5 | 201 |
| 1.4597 | X8CrMnCuNB17-8-3 | 204Cu |
| 1.4401 | X5CrNiMo17-12-2 | 316 |
| 1.4404 | X2CrNiMo17-12-2 | 316L / *≈ 316L |
| 1.4571 | X6CrNiMoTi17-12-2 | |
| 1.4432 | X2CrNiMo17-12-3 | 316L |
| 1.4845 | X8CrNi25-21 | 310S |
| 1.4841 | X15CrNiSi25-21 | 314 |
| Ferritics | ||
| Euronorm | UNS | AISI |
| 1.4016 | X6Cr17 | 430 |
| 1.4113 | X6CrMo17-1 | 434 |
| 1.4105 | X6CrMoS17 | 430F |
| 1.4104 | X14CrMoS17 | - |
| Duplex | ||
| Euronorm | UNS | AISI |
| 1.4482 | X2CrMnNiMoN21-5-3 | S32001 (2001) |
| 1.4362 | X2CrNiN23-4 | S32304 (2304) |
| 1.4462 | X2CrNiMoN22-5-3 | S31803 (2205) |